What is VWAP?
A simple average treats every price the same. VWAP does not. If 10,000 shares traded at ₹100 and only 100 shares at ₹110, the VWAP sits very close to ₹100, because that is where most of the business was done.
Large funds use VWAP as a benchmark. If a fund buys during the day at an average below VWAP, its execution was cheaper than the day’s average; above VWAP, dearer. Many intraday traders watch the same line because so many large orders are measured against it.
VWAP formula
The sums are cumulative. Each new bar adds its TP × volume to the running numerator and its volume to the running denominator. Because the denominator keeps growing, VWAP moves a lot in the first minutes and becomes slower later in the day.
Worked example: calculating VWAP bar by bar
Below are five 5-minute bars of a NIFTY futures contract. Prices and volumes are invented to keep the arithmetic easy.
| Bar | High | Low | Close | Typical price | Volume | Cum. TP × Vol | Cum. volume | VWAP |
|---|---|---|---|---|---|---|---|---|
| 1 | 24,020 | 23,980 | 24,000 | 24,000 | 1,000 | 2,40,00,000 | 1,000 | 24,000.00 |
| 2 | 24,050 | 24,010 | 24,030 | 24,030 | 1,500 | 6,00,45,000 | 2,500 | 24,018.00 |
| 3 | 24,060 | 24,020 | 24,040 | 24,040 | 800 | 7,92,77,000 | 3,300 | 24,023.33 |
| 4 | 24,040 | 23,990 | 24,000 | 24,010 | 1,200 | 10,80,89,000 | 4,500 | 24,019.78 |
| 5 | 24,010 | 23,970 | 23,990 | 23,990 | 500 | 12,00,84,000 | 5,000 | 24,016.80 |
Bar 5 closes at 23,990, about 27 points below VWAP. Bar 2 carried the most volume, so its price of 24,030 pulls VWAP up more than bar 5’s lighter volume can pull it down. That is the weighting at work.
How VWAP is read intraday (both readings)
VWAP is a reference line, not a signal. The table shows common readings and the opposite views traders also hold.
| Situation | Common reading | Alternative reading |
|---|---|---|
| Price holding above VWAP | Buyers have been paying above the day’s average; often read as bullish for the session | Price may be stretched and drift back toward the average |
| Price holding below VWAP | Sellers have been accepting below average; often read as bearish for the session | Price may be cheap relative to the day and attract buyers |
| Price crossing VWAP repeatedly | No clear control; range-like session | Large orders may be working around the average |
| Price far outside the upper or lower band | Strong one-sided session | Stretched; some expect movement back toward VWAP |
| VWAP sloping steadily | Volume-weighted trend for the day | Slope can flatten quickly after a big-volume bar |
Notice that each reading has a mirror. Whether price "should" stay away from VWAP or come back to it depends on the session, and no line can tell you which one you are in.
Variants: anchored VWAP, VWAP bands and others
Anchored VWAP
Anchored VWAP uses the same formula but starts the sums from a bar you choose instead of the session open. Common anchors are a big gap, a swing high or low, an event day such as a policy announcement, or the start of a new expiry series. It answers: "What is the average price paid by everyone who traded since that point?"
VWAP bands
Bands show how far price has wandered from the day’s average in volume-weighted terms. Some platforms use percentage bands instead of standard deviations. Bands widen when the session is volatile and stay tight on quiet days.
- Session VWAP: resets every day; the default on intraday charts.
- Weekly or monthly VWAP: resets each week or month; a slower reference.
- Rolling VWAP: uses a fixed look-back window (for example the last 20 bars) instead of a fixed start.
- TWAP: time-weighted average price ignores volume; it is a different benchmark used for spreading orders evenly over time.
Using VWAP with other data
- Volume profile and footprint: VWAP is one number for the whole session; a volume profile or footprint chart shows where inside the range that volume actually traded.
- Support and resistance: VWAP is often listed among the volume-based ways to mark support and resistance zones, together with the session POC.
- Options data: for index options, many traders compare futures VWAP with high-OI strikes from the option chain and the OI profile.
- Buildup: price above VWAP with rising futures OI is a different picture from price above VWAP with falling OI. See long and short buildup.
Mistakes and limits
- Drawing VWAP on an index. The NIFTY 50 or SENSEX index has no traded volume; use futures or the stocks themselves.
- Reading late-day VWAP like early VWAP. After a few hours, even large bars barely move the line.
- Using session VWAP across days. For multi-day views, use anchored or weekly VWAP.
- Ignoring rollover. When the near-month future changes, volume moves to the next month and VWAP on the old contract becomes thin.
- Applying it to illiquid contracts. Few trades make VWAP jumpy and less meaningful.
Related views in TredexView
TredexView does not list VWAP as a separate chart layer. Its AI Chart focuses on six support and resistance zones on the index and on CE and PE premiums, plus Volume profile, Footprint (NIFTY and BANK NIFTY futures), OI profile and OI Pulse layers. The volume layers show the same raw ingredient VWAP is built from: how much traded at each price.
You can compare a VWAP from your own charting tool with these layers, and use the Backtester to replay past sessions. See the footprint chart tool for the volume-by-price view. Data is for analysis and education and can be delayed.
Frequently asked questions
What is VWAP in the stock market?
VWAP is the volume weighted average price: the total value traded divided by the total quantity traded since the session started. It shows the average price paid during the day, with busy prices counting more.
What is the full form of VWAP?
VWAP stands for Volume Weighted Average Price.
What is the meaning of VWAP in the share market?
In the share market, VWAP is used as the fair average price of the day. Funds measure their buying and selling against it, and traders watch whether price is above or below it as a reference for who has been in control.
How is VWAP used for intraday?
Intraday, VWAP is mostly used as a reference line: price above it is often read as buyers paying above average, below it as sellers accepting below average. Others read distance from VWAP as stretch that may fade. It is a context tool, not a signal.
What is the VWAP indicator and how is it used?
The VWAP indicator draws the running VWAP on an intraday chart, often with bands one or two standard deviations away. People use it to see the session’s average price, judge execution quality and compare price location through the day.
What is anchored VWAP?
Anchored VWAP uses the same formula but starts from a bar you choose, such as a gap or a major high or low, instead of the session open. It shows the average price paid by everyone who traded since that point.
What is the difference between VWAP and a moving average?
A moving average weights each bar’s price equally over a fixed window. VWAP weights each price by volume and usually starts from the session open, so heavy-volume prices pull it more and it does not roll forward.
Related guides and tools
- Footprint chartA footprint chart is a candlestick-style chart that shows how much volume traded at each price inside every bar, split into volume that hit the bid (aggressive sellers) and volume that lifted the ask (aggressive buyers).
- Support and resistanceSupport is a price zone where falling prices have paused or turned because buying met the selling, and resistance is a zone where rising prices have paused because selling met the buying.
- OI profileAn OI profile is a horizontal bar chart that plots the open interest of call (CE) and put (PE) options at each strike against the price axis, so you can see where open option positions sit relative to the current price.
- Market depthMarket depth is the list of pending buy (bid) and sell (ask) limit orders for a stock or contract at different prices, showing the quantity and number of orders waiting at each level.
- Footprint chartA footprint chart is a candlestick chart that shows, inside every candle, how much volume traded at each price and how that volume splits between buying and selling.
- Support & resistanceSupport and resistance levels are price areas where buying or selling interest has been concentrated, and TredexView’s AI Chart derives six of them (S-MAX, S2, S1, R1, R2, R-MAX) from option-chain OI, volume and price.