What is a footprint chart?
A normal candle gives four prices and one volume. A footprint adds what happened inside it: where most contracts changed hands, and which side crossed the spread to get filled.
Every trade has a buyer and a seller, so "more buyers than sellers" is never literally true. What a footprint measures is aggression. A trade that executes at the ask means a buyer was impatient and paid the offer. A trade that executes at the bid means a seller was impatient and hit the bid. The passive side sat in the order book and waited.
Footprints need real traded volume, so they are drawn on futures or stocks, not on the NIFTY 50 index itself. An index is a calculated number and has no volume of its own. That is why footprints for NIFTY and BANK NIFTY are built on their futures contracts.
Bid x ask: what each part of a footprint shows
Most layouts put prices down the middle, bid volume on the left and ask volume on the right.
| Element | What it shows | How it is calculated |
|---|---|---|
| Bid volume (left) | Contracts sold by aggressive sellers at that price | Sum of trades classified as hitting the bid |
| Ask volume (right) | Contracts bought by aggressive buyers at that price | Sum of trades classified as lifting the ask |
| Row delta | Net aggression at one price | Ask volume − bid volume at that row |
| Bar delta | Net aggression for the whole bar | Total ask volume − total bid volume in the bar |
| Cumulative delta | Running net aggression through the session | Sum of bar deltas since the session start |
| POC | Point of control: the busiest price in the bar or session | Row with the highest total volume |
| Value area (VAH / VAL) | Price range holding most of the volume | Rows around the POC that hold about 70% of total volume |
| Imbalance | One side much heavier than the other at adjacent prices | Diagonal ratio, often flagged at 3:1 (300%) or more |
Footprint formulas: delta, cumulative delta, POC and imbalance
Why diagonal? A buyer lifting the ask at 24,005 is paying above the bid one row lower, so buying at a price is compared with selling just below it. Diagonal is the common default; some platforms also offer a same-row comparison.
Value area. Start at the POC and keep adding the busier neighbouring row (above or below) until the area holds about 70% of the volume. Its top is the value area high (VAH) and its bottom the value area low (VAL).
Stacked imbalance. Three or more consecutive rows with an imbalance on the same side. The ratio (3:1 is common) and the row count are settings, so two charts can disagree on the same data.
Worked example: reading one footprint bar
Here is one 5-minute bar of a NIFTY futures footprint with 5-point rows. Read the table from the top price down. Numbers are contracts and are made up for teaching.
| Price | Bid vol | Ask vol | Row delta | Row total | Note |
|---|---|---|---|---|---|
| 24,010 | 50 | 30 | −20 | 80 | Bar high; thin volume |
| 24,005 | 80 | 260 | +180 | 340 | Buy imbalance (260 ÷ 60 = 4.3) |
| 24,000 | 60 | 240 | +180 | 300 | Buy imbalance (240 ÷ 70 = 3.4) |
| 23,995 | 70 | 300 | +230 | 370 | POC; buy imbalance (300 ÷ 90 = 3.3) |
| 23,990 | 90 | 110 | +20 | 200 | No imbalance (110 ÷ 120 = 0.9) |
| 23,985 | 120 | 40 | −80 | 160 | Bar low |
| Bar total | 470 | 980 | +510 | 1,450 | Positive bar delta |
- Bar delta is +510 (980 ask − 470 bid).
- POC is 23,995 with 370 contracts, in the lower half of the bar.
- Value area is 23,990–24,005. Starting at the POC (370), adding 24,000 (300) and 24,005 (340) gives 1,010; adding 23,990 (200) gives 1,210, which is above 70% of 1,450 (1,015).
- Stacked buy imbalance at 23,995–24,005. Three rows in a row have ask volume more than 3x the bid one row below.
- Thin top row. Only 80 contracts traded at the high, and sellers were slightly heavier there.
A conventional reading: buyers were aggressive through the middle of the bar, and the stacked zone is worth watching later. A cautious reading: the high had little volume and negative delta, so the push faded at the top. Neither tells you what the next bar will do.
| Bar | Close | Bar delta | Cumulative delta |
|---|---|---|---|
| 1 | 24,000 | +510 | +510 |
| 2 | 24,020 | +200 | +710 |
| 3 | 24,040 | −150 | +560 |
| 4 | 24,050 | −300 | +260 |
Price makes higher closes in bars 3 and 4 while cumulative delta falls: a delta divergence. Many read it as buying aggression drying up; others as passive buyers soaking up aggressive selling with limit orders. The footprint alone cannot settle which is true.
How to interpret common footprint patterns
Footprint patterns describe what already traded. Each has a common reading and an opposite one.
| Pattern | Common reading | Alternative reading |
|---|---|---|
| Large positive bar delta | Buyers were the aggressive side | Buyers may be chasing into passive sellers |
| Large negative bar delta | Sellers were the aggressive side | Sellers may be hitting passive buyers |
| Delta divergence | Aggression fading against the move | Passive orders absorbing the other side |
| Stacked buy imbalances | A zone where buyers were very active | Short covering can look the same |
| Stacked sell imbalances | A zone where sellers were very active | Long unwinding can look the same |
| Absorption | Heavy volume at a price that did not give way | The level may break once passive size is used up |
| POC at the bar extreme | Most business done at the high or low | Late trapped participants at that price |
| Tiny volume at the high/low | Interest dried up at that extreme | The move may not be finished (an unfinished auction) |
What absorption looks like
Absorption is heavy aggressive volume on one side while price barely moves, for example several bars of heavy bid volume at a low that keeps holding. It suggests large passive limit orders are taking the other side. It is visible only after the fact and ends when that passive size is used up or pulled.
Types of footprint charts
- Bid x ask footprint: the classic layout with bid volume on the left and ask volume on the right of each price.
- Delta footprint: prints only row delta (ask − bid), coloured green or red by sign, so the net side is quick to see.
- Volume footprint: prints total volume per price without a buy/sell split; this is simply a per-bar volume profile.
- Bar type: footprints can be drawn on time bars (1, 3, 5 minutes) or on volume and range bars; the same data looks different on each.
Using a footprint with other data
- OI profile: the OI profile shows CE and PE open interest by strike. A stacked imbalance near a strike with very high open interest gives two independent views of the same price area.
- Futures open interest: footprint delta plus the change in futures OI helps separate new positions from exits. Rising price with rising OI is called long buildup; rising price with falling OI is short covering. See long and short buildup.
- VWAP: many traders note whether imbalances form above or below the session VWAP, the volume-weighted average price.
- Support and resistance: footprint POCs and absorption areas are one of the volume-based ways to mark support and resistance zones.
Footprint charts for the Indian stock market
Footprint charts came from markets where every trade is published with a clear aggressor side. Indian market data feeds that most platforms receive do not label each trade as buyer-initiated or seller-initiated. So the bid/ask split is estimated, usually by comparing each trade price with the last known bid and ask, or with the previous trade (the tick rule).
Estimation works reasonably on liquid NIFTY and BANK NIFTY futures but is never exact: trades inside the spread and fast quote changes can land on the wrong side. That is why the split should be labelled "Est.", not presented as exchange data.
- Use the near-month future; far months trade thinly and give sparse footprints.
- Around rollover and on expiry days, volume shifts between contracts and can distort comparisons.
- The first few minutes after 09:15 IST are often very heavy and can dominate a session POC.
Common mistakes and limits
- Treating delta as "buyers vs sellers". Every contract has both; delta only shows who crossed the spread.
- Reading one bar in isolation. A single imbalance or absorption print is common and often means little.
- Ignoring settings. Imbalance ratio, row size and bar type change what you see; note them when you compare charts.
- Assuming the split is exact. Estimated classification can flip a small row delta from positive to negative.
See a footprint chart in TredexView
In TredexView, the footprint is a layer on the AI Chart for NIFTY and BANK NIFTY futures, on the web and in the Android app with one account. The bid/ask buy-sell split is marked "Est." because it is estimated from the feed, as explained above.
- Open the AI Chart, pick NIFTY or BANK NIFTY and turn on the Footprint layer.
- Read each bar from the POC outwards, then bar delta and any stacked imbalances.
- Add the OI profile or Volume profile layer to compare the same price area.
- Use the Backtester to replay past sessions without time pressure.
The footprint chart tool page explains the layer’s settings in more detail. Data is shown for analysis and education and can be delayed or incomplete.
Frequently asked questions
What is a footprint chart in trading?
A footprint chart shows the volume traded at each price inside every candle, usually split into volume at the bid (aggressive selling) and volume at the ask (aggressive buying). It helps you see where trading was concentrated and which side was crossing the spread.
How do I read a footprint chart?
Start with the POC (the busiest price), then bar delta (ask − bid volume), then stacked imbalances and thin rows at the high or low. One bar on its own says little; compare it with the next few bars.
What is delta in a footprint chart?
Delta is ask volume minus bid volume, either for one price row or for the whole bar. Positive delta means aggressive buyers traded more contracts; negative delta means aggressive sellers did. Cumulative delta adds bar deltas through the session.
What is an imbalance in a footprint chart?
An imbalance is when ask volume at one price is much larger than bid volume one price lower (or the reverse for sellers), usually 3:1 or more. Three or more imbalances in consecutive rows form a stacked imbalance. The threshold is a setting, not a fixed rule.
What is POC in a footprint chart?
POC stands for point of control. It is the price with the highest total volume in a bar or session. The value area is the range around the POC that holds about 70% of the volume, with its top called VAH and its bottom VAL.
What is absorption in a footprint chart?
Absorption is heavy aggressive volume at a price that does not give way, which suggests large passive limit orders are taking the other side. It is a description of what happened; the level can still break once that passive size is used up.
Is there a footprint chart for the Indian stock market?
Yes, on contracts with traded volume such as NIFTY and BANK NIFTY futures, not on the index itself. Most Indian feeds do not tag the aggressor side, so the bid/ask split is an estimate.
How can I use footprint charts for free?
TredexView shows a footprint layer for NIFTY and BANK NIFTY futures on its AI Chart, and new users can start with a free trial on the web or Android. In any tool, check how bid and ask volume is classified.
Related guides and tools
- Footprint chartA footprint chart is a candlestick chart that shows, inside every candle, how much volume traded at each price and how that volume splits between buying and selling.
- OI profileAn OI profile is a horizontal bar chart that plots the open interest of call (CE) and put (PE) options at each strike against the price axis, so you can see where open option positions sit relative to the current price.
- VWAPVWAP (volume weighted average price) is the average price a stock or contract has traded at during a period, where each price is weighted by the volume traded there, and it usually resets at the start of each session.
- Market depthMarket depth is the list of pending buy (bid) and sell (ask) limit orders for a stock or contract at different prices, showing the quantity and number of orders waiting at each level.
- Support and resistanceSupport is a price zone where falling prices have paused or turned because buying met the selling, and resistance is a zone where rising prices have paused because selling met the buying.
- Long and short buildupLong buildup is the label given when a futures or option contract’s price rises and its open interest rises at the same time, which is usually read as new long positions being added.
- Options backtestingOptions backtesting means testing an idea on past market data to see how it would have behaved, and TredexView’s AI Backtester does this by replaying past NSE and BSE sessions tick by tick on the option chain and spli…