Skip to content

Learn · Price structure

How to Find Support and Resistance Levels: Price, Volume and OI Methods

Support is a price zone where falling prices have paused or turned because buying met the selling, and resistance is a zone where rising prices have paused because selling met the buying. This guide shows three ways to find these zones (price-based, volume-based and option-OI-based), works through one illustrative NIFTY example, and explains why they are reference areas, not lines the market must respect.

Updated: · हिंदी में पढ़ें

What are support and resistance in trading?

The idea rests on memory and orders. Participants remember where price turned before, and many leave orders near those prices. When price comes back, those orders can slow it down. When enough orders are used up, the zone gives way.

A broken zone often changes role. Old resistance that price has moved above is then watched as support, and old support that has been broken is watched as resistance. This is called role reversal.

Method 1: price-based support and resistance

  • Swing highs and lows: turning points on the chart where price reversed. The more times a zone was tested, the more people watch it.
  • Previous day high, low and close: widely used reference prices for the next session.
  • Round numbers: NIFTY at 24,000 or 24,500 attracts attention and orders simply because it is a round figure.
  • Opening gaps: the edges of an unfilled gap are often watched as zones.
  • Trendlines and channels: lines through rising lows or falling highs. They are more subjective than horizontal zones.

Method 2: volume-based support and resistance

Volume methods ask where the most trading actually happened. A price where heavy volume changed hands is a price many participants agreed was fair, so it often acts as a magnet or a barrier later.

  • Volume profile POC: the single price with the highest session volume.
  • High-volume and low-volume areas: price tends to slow in high-volume areas and move quickly through low-volume gaps.
  • VWAP: the volume weighted average price of the session is a widely watched reference.
  • Footprint absorption: on a footprint chart, heavy volume at a price that did not give way marks an area where passive orders held.

Volume needs a traded contract, so for NIFTY or BANK NIFTY these methods use futures data, not the index.

Method 3: support and resistance using the option chain

In index options, many traders read open interest by strike as a map of where option writers have positions. The common logic is that call writers lose if price rises above their strike and put writers lose if price falls below theirs, so they have a reason to defend those strikes.

  1. Open the option chain for the nearest expiry.
  2. Find the strike with the highest call (CE) OI above the current price; this is the common resistance reading.
  3. Find the strike with the highest put (PE) OI below the current price; this is the common support reading.
  4. Check change in OI at those strikes: rising OI means positions are still being added; falling OI means they are being closed.
  5. Watch whether the highest-OI strikes shift during the day. A move of the largest PE OI to a higher strike, for example, is read as the support area moving up.

The OI profile draws the same data as bars next to price, and max pain and the put-call ratio summarise it in single numbers.

Worked example: three methods on one NIFTY chart

Assume NIFTY closed yesterday at 24,000 after a high of 24,150 and a low of 23,850. All numbers are made up for teaching.

Illustrative example — pivot points from a made-up previous session (H 24,150, L 23,850, C 24,000)
LevelFormulaValue
R2P + (H − L)24,300
R12P − L24,150
Pivot (P)(H + L + C) ÷ 324,000
S12P − H23,850
S2P − (H − L)23,700
Illustrative example — nearest-expiry option OI, NIFTY at 24,000 (made-up OI in lakh contracts)
StrikeCE OIPE OICommon reading
24,2009515Highest CE OI: resistance reading
24,1007030
24,0005055ATM: heavy on both sides
23,9002570
23,8001090Highest PE OI: support reading
Illustrative example — combining the methods into zones
MethodZone above 24,000Zone below 24,000
Price (previous high/low, pivots)24,150 (R1 and previous high)23,850 (S1 and previous low)
Volume (made-up session POC, futures)—23,950
Option OI24,200 (highest CE OI)23,800 (highest PE OI)
Resulting reference zone24,150–24,20023,800–23,850

Two methods point to 24,150–24,200 above and 23,800–23,850 below, so many traders would mark those as zones of interest. That overlap is called confluence. It means more people are watching the area, which can make reactions sharper in either direction. It does not mean price will stop there.

How to interpret support and resistance (both readings)

Price at a zone: conventional and contrarian readings
SituationConventional readingContrarian readingWhat to check
Price approaches a zoneExpect a pause or reactionCrowded zones can break fastVolume and OI change as price arrives
Price breaks a zone on heavy volumeZone has given way; role may reverseBreaks can fail and come back insideWhether price holds beyond the zone
Price breaks then quickly comes backA false break; zone still activeThe next attempt may succeedRepeated tests and shrinking reactions
Highest PE OI strike moves upSupport area risingPut writing can be unwound just as fastChange in OI over the next intervals
Highest CE OI strike moves upResistance area risingCall writers may be rolling under pressureCE premium and IV at the new strike
Many tests of the same zoneZone is strongEach test uses up orders; zone weakeningSize of each bounce

Limits of support and resistance

  • Lines instead of zones. Price rarely turns at an exact number; give zones some width.
  • Hindsight. Zones look obvious on old charts. Drawn live, they are far less clear.
  • OI ambiguity. High OI can be bought options or hedges, not writers defending a strike.
  • Expiry effects. Near expiry, OI collapses and shifts quickly, so OI-based zones move. See NIFTY expiry.
  • News and gaps. Overnight events can open the market far beyond any zone.
  • Too many lines. Mixing every method on one chart produces zones at every price.

See support and resistance zones in TredexView

TredexView’s AI Chart draws six support and resistance levels on the index and on both CE and PE premiums, in two sets: a Human Zone and an AI Zone. You can view them live, locked, or in replay, on the web and in the Android app. They are data-derived reference zones for study, not a forecast or a recommendation.

The option chain highlights OI-based support and resistance strikes, and the support and resistance tool page explains how the AI Chart zones are shown. To study how zones behaved in past sessions, use the Backtester; past behaviour does not tell you future behaviour. Data can be delayed.

Frequently asked questions

How do I find support and resistance levels?

Use three lenses: price (swing highs and lows, previous day high and low, round numbers, pivots), volume (volume profile POC, VWAP) and, for index options, open interest by strike. Mark zones, not single prices, and pay attention where several methods overlap.

How do I find support and resistance in NIFTY?

Mark the previous session’s high, low and close, nearby round numbers and swing points on the chart. Then check the nearest-expiry option chain: the highest PE OI strike below price is commonly read as support and the highest CE OI strike above price as resistance.

How do I find support and resistance levels using the option chain?

Look for the strike with the highest call OI above the current price (common resistance reading) and the strike with the highest put OI below it (common support reading). Then watch change in OI at those strikes to see if positions are being added or closed.

What is support and resistance in trading?

Support is a price area where falling prices have paused because buying met selling; resistance is an area where rising prices have paused because selling met buying. They are zones inferred from past data.

What is support and resistance in the stock market?

In the stock market, they are price zones many participants watch because price turned there before or because large orders or positions sit there. They help organise a chart but do not decide where price will go.

What happens when support breaks?

Often the broken support is then watched as resistance (role reversal). But breaks also fail: price can dip below a zone and come back inside, so a break on its own says nothing certain.

Are AI support and resistance levels reliable?

AI-computed levels are another way to summarise price, volume and OI data. Like any method, they are reference zones that sometimes hold and sometimes break. They are not a forecast, and past behaviour does not tell you future behaviour.

  • Support & resistanceSupport and resistance levels are price areas where buying or selling interest has been concentrated, and TredexView’s AI Chart derives six of them (S-MAX, S2, S1, R1, R2, R-MAX) from option-chain OI, volume and price.
  • OI profileAn OI profile is a horizontal bar chart that plots the open interest of call (CE) and put (PE) options at each strike against the price axis, so you can see where open option positions sit relative to the current price.
  • Open interestOpen interest (OI) is the total number of futures or option contracts that are still open, meaning they have been created by a trade and not yet closed, exercised or expired.
  • How to read an option chainAn option chain is a table that lists every call (CE) and put (PE) contract of one underlying and one expiry, strike by strike, with each contract’s price, open interest, volume, implied volatility and Greeks.
  • VWAPVWAP (volume weighted average price) is the average price a stock or contract has traded at during a period, where each price is weighted by the volume traded there, and it usually resets at the start of each session.
  • Max painMax pain is the strike price at which the total payout that option writers would owe to option buyers at expiry is the smallest, calculated from the open interest of every call and put in one expiry.
  • Support ResistanceSupport भाव का वह क्षेत्र है जहाँ गिरते भाव को पहले बार-बार ख़रीद का सहारा मिला, और Resistance वह क्षेत्र है जहाँ बढ़ते भाव को बार-बार बिकवाली की रुकावट मिली।

Study the data. Make your own decisions.

TredexView is for educational and informational purposes only and is not a SEBI registered broker or advisory service.