Skip to content

Learn · Open interest

What Is OI Profile? Open Interest by Strike, Explained

An OI profile is a horizontal bar chart that plots the open interest of call (CE) and put (PE) options at each strike against the price axis, so you can see where open option positions sit relative to the current price. This page explains how it is built, how traders commonly read it, how it differs from a volume profile, and what it cannot tell you.

Updated:

What is an OI profile?

An option chain already lists open interest for every strike, but as numbers in a table. The OI profile turns those numbers into bars and lines them up with the candles. A strike with a long bar is a price where many contracts are still open.

The idea borrows from volume profile, which plots traded volume by price. The difference is important: volume counts trades that already happened, while OI counts contracts that are still open at that strike.

How an OI profile is built

  1. Pick one underlying (for example NIFTY 50) and one expiry.
  2. For each strike, take CE OI and PE OI from the option chain.
  3. Draw a bar for each, on the strike’s price on the chart’s vertical axis.
  4. Optionally overlay change in OI, so you see today’s additions and reductions on top of the total.
  5. Refresh as new OI data arrives; exchanges update OI through the session.

Because strikes are spaced (for example every 50 points on NIFTY), the profile is a set of evenly spaced bars, not a smooth curve. Strikes far from the price usually hold small OI and are often hidden to keep the chart readable.

Worked example: reading an OI profile

Assume NIFTY is at 24,000 and you are looking at the nearest weekly expiry. The table below holds the data an OI profile would draw. OI is in lakh contracts and is made up.

Illustrative example — OI profile data, NIFTY at 24,000 (made-up OI in lakh contracts)
StrikeCE OICE chg OIPE OIPE chg OIStrike PCR
24,20090+2512+10.13
24,10070+1825+40.36
24,00055+660+121.09
23,90020−375+203.75
23,80010−185+158.50
  • Largest CE bar: 24,200 (90 lakh). Many traders mark this as an upper reference area.
  • Largest PE bar: 23,800 (85 lakh). Many traders mark this as a lower reference area.
  • 24,000 has big bars on both sides. OI is heavy on calls and puts at the ATM strike, which often happens near expiry.
  • Change in OI is rising at 24,100–24,200 calls and 23,900 puts. New positions are being added there today.

The conventional reading is that call writers are defending 24,100–24,200 and put writers 23,800–23,900, so the market may stay between them. The contrarian reading is that crowded strikes can be broken quickly once price reaches them, because writers then buy back their options. The profile shows positioning; it does not show which reading will play out.

How to interpret an OI profile

OI profile patterns: conventional and contrarian readings
What you seeConventional readingContrarian / other readingWhat to check
Largest CE OI above priceResistance area (call writers)Could be bought calls or hedges, not writingCE premium and IV trend at that strike
Largest PE OI below priceSupport area (put writers)Could be protective puts held by buyersPE premium and IV trend at that strike
Big CE and PE OI at the same strikeRange expected around that strikeStraddle sellers can be forced out on a moveDistance of price from the strike, days to expiry
CE OI rising at strikes just above priceUpper area being reinforcedFresh call buying on a breakoutPrice direction while OI rises
PE OI falling at the support strikeSupport weakening (unwinding)Puts being booked after a fallFutures price and PE premium
Whole profile shifting higherPositions rolling up with priceLate chasing after a moveChange in OI across several strikes

A useful habit is to read the profile twice: once for totals (where the big open positions are) and once for today’s change (where positions are moving now). A large total that is shrinking tells a different story from a large total that is still growing.

Variants: OI, change in OI, OI pulse and volume profile

OI profile versus related views
ViewWhat it plotsUpdatesMost useful for
OI profileTotal open CE and PE contracts by strikeThrough the sessionWhere big positions sit
Change-in-OI profileOI added or closed since the previous closeThrough the sessionWhere positions moved today
OI pulse (short-window change)OI change in the last 1 or 3 minutes by strikeEvery few minutesWhere activity is happening right now
Volume profileContracts traded at each price on the chartEvery tradeWhere trading was busiest

Single expiry vs combined. A profile for the nearest expiry is the most common for short-term study. A combined profile across expiries shows larger, slower positioning but can mix very different intentions. The change in OI guide explains the daily change numbers in detail.

Using the OI profile with other data

  • Max pain: max pain is computed from the same OI by strike. It usually sits between the large CE and PE bars.
  • Put-call ratio: the overall PCR sums all PE OI over all CE OI; the profile shows where that ratio comes from.
  • Implied volatility: if IV at a big-OI strike is rising, option prices there are getting more expensive, which changes the picture for writers. See implied volatility.
  • Footprint: a footprint chart on futures shows short-term aggression near the same prices.

Mistakes and limits

  • Assuming every open contract was written. Each contract has a buyer and a writer; OI alone cannot tell which side is active.
  • Ignoring hedges. Institutions often hold options against stock or futures positions; those OI bars carry no directional view.
  • Reading near-expiry profiles like far ones. Close to expiry, OI shrinks fast and ATM strikes swell.
  • Watching totals only. The change in OI often matters more for the current session.
  • Forgetting data timing. OI updates in steps, so the profile can lag sharp moves by minutes.

See the OI profile in TredexView

TredexView draws an OI profile layer on the AI Chart: CE OI and PE OI strips by strike, aligned to the candles. An OI Pulse layer shows OI change in the last 1 or 3 minutes by strike, so you can see where activity is building. Both work on the web and in the Android app.

For the numbers behind the bars, open the option chain, which lists OI, change in OI, volume, IV and Greeks for every strike. The OI profile tool page walks through the layer’s settings. Data is for analysis and education and can be delayed.

Frequently asked questions

What is OI profile?

OI profile is a sideways bar chart of call and put open interest at each strike, aligned with the price chart. It shows where open option positions are concentrated relative to the current price.

What is the OI profile indicator?

It is a chart overlay that reads OI by strike from the option chain and draws it as bars next to the candles. It is not a buy or sell signal; it is a way to see positioning on the same screen as price.

How do I use the OI profile?

Pick the nearest expiry, find the strikes with the largest CE and PE bars, then check whether OI at those strikes is rising or falling today. Many traders treat them as reference areas, while also keeping the contrarian view that crowded strikes can break quickly.

What is the difference between OI profile and volume profile?

Volume profile counts contracts traded at each price; OI profile counts option contracts still open at each strike. Volume shows where trading happened, OI shows where positions are held.

Does high call OI mean resistance?

It is often read that way because call writers lose if price rises past their strike. But high call OI can also be bought calls or hedges, so on its own it says nothing certain about where price will stop.

Which expiry should an OI profile use?

For short-term study, the nearest expiry is the usual choice because it holds the most active positions. Combined-expiry profiles show slower, larger positioning but mix different time frames.

  • OI profileAn OI profile is a set of horizontal bars, drawn beside the price chart, that shows the call (CE) and put (PE) open interest at each strike price.
  • Open interestOpen interest (OI) is the total number of futures or option contracts that are still open, meaning they have been created by a trade and not yet closed, exercised or expired.
  • Change in OIChange in OI is the difference between a contract’s open interest now and its open interest at an earlier reference point, usually the previous session’s close.
  • Max painMax pain is the strike price at which the total payout that option writers would owe to option buyers at expiry is the smallest, calculated from the open interest of every call and put in one expiry.
  • Put call ratioThe put call ratio (PCR) is the total of put options divided by the total of call options for an underlying, measured either by open interest (OI PCR) or by traded volume (volume PCR).
  • Support and resistanceSupport is a price zone where falling prices have paused or turned because buying met the selling, and resistance is a zone where rising prices have paused because selling met the buying.
  • OI analysisOI analysis means reading open interest (the number of option contracts still open) and its change at every strike, to see where positions are being built or closed.

Study the data. Make your own decisions.

TredexView is for educational and informational purposes only and is not a SEBI registered broker or advisory service.