Skip to content

Learn · Option chain basics

How to Read an Option Chain: Columns, Steps and an Example

An option chain is a table that lists every call (CE) and put (PE) contract of one underlying and one expiry, strike by strike, with each contract’s price, open interest, volume, implied volatility and Greeks. This guide walks through the layout, explains what each column means, and reads an illustrative NIFTY chain step by step, with the honest limits of each reading.

Updated: · हिंदी में पढ़ें

What is an option chain?

A call (CE) gives its buyer the right, but not the obligation, to buy the underlying at the strike price on expiry. A put (PE) gives its buyer the right to sell at the strike.

Every option has a buyer and a seller (also called a writer). That simple fact matters for every column you read: a number such as open interest counts contracts that have both a long side and a short side, so it never tells you on its own who is “right”.

The layout: strikes, ITM, ATM and OTM

Strikes are listed in steps (for example every 50 or 100 points for NIFTY) around the current price. Most chains shade the in-the-money side so you can find the current price at a glance. The strike closest to the spot price is called at-the-money.

Illustrative example — moneyness when NIFTY is at 24,000
StrikeCall (CE) is…Put (PE) is…Why
23,800In the money (ITM)Out of the money (OTM)The call has 200 points of intrinsic value; the put has none.
24,000At the money (ATM)At the money (ATM)Strike equals (or is nearest to) the spot price.
24,200Out of the money (OTM)In the money (ITM)The put has 200 points of intrinsic value; the call has only time value.

An option’s premium has two parts: intrinsic value (how much it is in the money) and time value (everything else). OTM options are made only of time value, which is why they lose value fastest as expiry nears. The option Greeks page explains this decay through theta.

What each column means

Column guide — the same columns appear on both the call side and the put side
ColumnWhat it isHow it is commonly readLimit
LTPLast traded price (premium) of that contract.Shows what the market currently pays for that right.Illiquid strikes may show a stale LTP; check bid and ask.
Change / % changeLTP versus the previous session’s close.Shows which side of the chain gained or lost premium.Premium also moves with time and IV, not just with price.
OIOpen interest: contracts open and not yet closed.Large OI marks strikes where many positions sit.Every contract has a buyer and a writer; OI cannot tell you which side started it.
Change in OIOI now minus OI at the previous close.Shows where fresh positions are being added or closed today.Rollover and hedging can move it for reasons unrelated to direction.
VolumeContracts traded during the session.Shows where activity is concentrated right now.High volume with flat OI often means positions just changed hands.
IVImplied volatility backed out of the premium.Higher IV means options are priced for bigger moves.Depends on the pricing model and inputs used.
Delta, Gamma, Theta, VegaSensitivities of the premium to price, delta, time and IV.Help explain why a premium moved.Model estimates, not observed values.
Bid / AskHighest buy quote and lowest sell quote.A narrow spread suggests better liquidity.Quotes can change in milliseconds.

Many chains, including the one in TredexView, add derived fields such as the put-call ratio, a buildup label (long buildup, short covering and so on) and highlights for the strikes with the largest call and put OI. These are calculations on top of the raw columns, not new information.

How to read an option chain in 6 steps

  1. Pick the underlying and expiry. The nearest expiry usually carries the most activity; a later expiry shows longer-dated positioning.
  2. Find the ATM strike. Locate the strike nearest the spot price; the shading changes side here.
  3. Scan OI on both sides. Note the strikes with the largest call OI and the largest put OI, and how far they are from the ATM strike.
  4. Check change in OI. See where OI is being added or reduced today. Fresh additions say more about current activity than old totals. The change in OI guide covers the details.
  5. Compare with premium. Pair each OI change with the premium change at that strike; that pairing is the basis of long and short buildup labels.
  6. Look at IV and summary ratios. Note ATM IV, the IV pattern across strikes, the PCR and max pain. Then step back and ask what the whole picture shows, and what it cannot show.

Worked example: reading an illustrative NIFTY chain

Illustrative example — NIFTY at 24,000, weekly expiry, OI in thousands of contracts (made-up numbers)
Call OICall chg OICall LTPStrikePut LTPPut chg OIPut OI
20−231623,80086+1895
35+124523,900115+1270
60+1518124,000151+1065
75+2012924,100199−340
110+308924,200259−125

Step 1 — ATM. The 24,000 strike is at the money. Calls below it (23,800, 23,900) are in the money; puts above it (24,100, 24,200) are in the money.

Step 2 — OI concentration. The largest call OI is at 24,200 (110) and the largest put OI is at 23,800 (95). Many readers call these the “call wall” and the “put wall”. The support and resistance guide explains how these zones are derived and why they shift.

Step 3 — change in OI. Calls at 24,100 and 24,200 added 50 thousand contracts in total today; puts at 23,800 and 23,900 added 30 thousand. Some put OI above spot is being closed (−3 and −1).

Step 4 — summary. Total call OI is 300 and total put OI is 295, so the OI-based PCR is 295 ÷ 300 ≈ 0.98, close to balanced. The chain shows positions clustered between 23,800 and 24,200; it does not show which way the index will move next.

How to interpret what you see (both readings)

The same observation can be read two ways. The conventional reading assumes most OI comes from option writers, who often hold larger positions. The contrarian reading points out that writers can be wrong, hedged, or forced to exit, which can speed up a move instead of stopping it.

Interpretation guide — common readings, not recommendations
ObservationConventional readingContrarian / alternative reading
Largest call OI at a strike above spotWriters expect price to stay below it, so it is read as a resistance zone.If price crosses it, writers may buy back calls, and that buying can add to the move.
Largest put OI at a strike below spotWriters expect price to stay above it, so it is read as a support zone.A break below can trigger put writers to cover, which can speed up the fall.
Call OI rising fast at OTM strikesFresh call writing; often read as a cap on upside.Could be buyers adding OTM calls, or hedges against short futures.
Put OI falling while price risesPut writers comfortable or booking gains; often read as no new fear.Could be hedges simply being removed; says little about direction.
PCR near 1Balanced positioning.Balance in totals can hide very unbalanced strike-wise positions.

Neither column is right by default. Traders often read call walls as bearish for the short term and put walls as bullish; contrarians read the same walls the other way. On its own, the chain says nothing certain.

Using the option chain with other data

  • Price chart: check whether the OI walls line up with zones the price has respected before. TredexView’s AI Chart shows six support and resistance levels next to the premium charts.
  • OI profile: a strike-wise bar view of call and put OI makes concentrations easier to see than a table; see the OI profile guide.
  • IV: a premium rise with a big IV rise is different from a premium rise driven by price; see implied volatility.
  • Expiry calendar: OI behaves differently on expiry day, when positions are closed or rolled; see the NIFTY expiry guide.

Common mistakes and honest limits

  • Reading total OI only. Old OI from previous sessions can hide what changed today; always check change in OI.
  • Treating OI walls as fixed. Walls move during the session as positions are added, closed or rolled.
  • Ignoring liquidity. Far OTM strikes with tiny volume can show stale prices and odd IVs.
  • Mixing expiries. OI in the next weekly or monthly expiry tells a different story from the current one.
  • Expecting certainty. Option data is one input among many and is often read in opposite ways by different traders.

See it in TredexView

The TredexView option chain shows strike-wise LTP, OI, change in OI, volume, IV, Delta, Gamma, Theta, Vega and PCR, with OI-based highlights and buildup labels. It is live in the app on the web and on Android with one account, and the AI Backtester can replay past sessions so you can practise reading a chain without real money.

Frequently asked questions

What is option chain in share market?

It is a table of all call and put contracts for one underlying and one expiry, arranged by strike price, showing each contract’s premium, open interest, change in OI, volume, IV and Greeks. It is a snapshot of option positioning, used for analysis and learning.

What is option chain and how to read it?

Start at the ATM strike, scan call OI and put OI for the largest concentrations, check change in OI for fresh activity, compare OI changes with premium changes, then look at IV, PCR and max pain. Read every observation both ways, because each has a conventional and a contrarian reading.

How to read option chain data for intraday?

For a single session, change in OI and volume matter more than total OI, because they show what changed today. Watch how OI shifts at strikes near the ATM over short intervals. Remember that intraday OI updates can lag price, so the picture is always slightly behind.

Option chain ITM OTM ATM: what do they mean?

ATM is the strike nearest the spot price. A call is in the money (ITM) when its strike is below spot and out of the money (OTM) when above; for puts it is the reverse. Most chains shade the ITM side so you can find the spot level quickly.

What does option chain indicate?

It indicates where option positions are concentrated, where they are being added or closed, how expensive options are (IV), and how premiums respond to price and time (Greeks). It does not indicate future direction with any certainty.

How to find support and resistance levels using option chain?

Many traders mark the strike with the largest put OI as a possible support zone and the strike with the largest call OI as a possible resistance zone. These zones move as OI changes, and price can cross them; they are reference areas, not fixed lines.

How to analyse option chain with example?

In the illustrative chain above, NIFTY is at 24,000, the largest call OI is at 24,200 and the largest put OI is at 23,800, and PCR is about 0.98. That shows positions clustered in a 400-point band and roughly balanced in total, which is a description of positioning, not a call on direction.

  • Option ChainAn option chain is a table that lists every call (CE) and put (PE) option of one underlying for one expiry, strike by strike, with its price, open interest, volume, implied volatility and Greeks.
  • NIFTY Option ChainThe Nifty option chain lists every NIFTY 50 call and put for a chosen expiry, strike by strike, with premium, open interest, change in OI, volume, IV and Greeks.
  • Open interestOpen interest (OI) is the total number of futures or option contracts that are still open, meaning they have been created by a trade and not yet closed, exercised or expired.
  • Change in OIChange in OI is the difference between a contract’s open interest now and its open interest at an earlier reference point, usually the previous session’s close.
  • Put call ratioThe put call ratio (PCR) is the total of put options divided by the total of call options for an underlying, measured either by open interest (OI PCR) or by traded volume (volume PCR).
  • Option GreeksOption Greeks are measures of how much an option’s premium is expected to change when one input changes and the others stay the same: delta for the underlying price, gamma for delta itself, theta for time, vega for im…
  • Max painMax pain is the strike price at which the total payout that option writers would owe to option buyers at expiry is the smallest, calculated from the open interest of every call and put in one expiry.
  • Support and resistanceSupport is a price zone where falling prices have paused or turned because buying met the selling, and resistance is a zone where rising prices have paused because selling met the buying.

Study the data. Make your own decisions.

TredexView is for educational and informational purposes only and is not a SEBI registered broker or advisory service.